The protective film corresponds to polyethylene or polypropylene film of transparent color with the sticky layer on the basis of an acrylic emulsion.
The film prevents formation of splinters in case of mirror damage. It is put on an inverse of the mirrors manually or on the automatic transfer line. It is an additional protection against corrosion of an amalgam of a mirror, protects from dampness and scratches, gives additional durability to a mirror. Such film is recommended to use for medium and big mirrors. The film possesses excellent adhesive properties.
Recommendations about drawing on of a protective film:
The mirror surface should be pure and dry. Ideal temperature of storage and film drawing: from +15 to +30 degrees. If the film has undergone to influence of low temperature, before using it is necessary to be sustained indoors at +15 - + 30 degrees. During the day. The maximum adhesion comes in 48 hours after a film being drawn on a mirror surface.
Weather conditions influence on speed of adhesion; small deviations are possible even at minor alterations of temperature from the mentioned values. These deviations don't influence on the basic characteristics of a film.
Thickness of a film:
Polyethylene 100 microns + 20 microns (a glued layer)
Polyethylene 140 microns +20 microns (a glued layer)
Polypropylene 40 microns + 20 microns (a glued layer)
Length of winding: Polyethylene:
Polyethylene - 100 m. of the item
Polypropylene - 100 m. of the item
Width of the rolls:
20, 30, 40, 50, 60, 70, 80, 90, 100, 120 sm.
Kinds of a film
Price
Polyethylene 100 microns transparent
25 rub \m. sq.
Polyethylene 100 microns white, black.
27 rub \m. sq.
Polyethylene 140 microns transparent
28 rub \m. sq.
Polypropylene 40 microns of
18 rub \m. sq.
Our assortment
Free teaching of technology of tinting
If you decided to set up your own service-center of tinting, the company LVI offers to go through a course of learning the system of installation of tinted and protective films. After finishing this course, you will get a certificate that confirms your professionalism and qualification. Address to the representatives of the company LVI for information.
Photo of factory:
Advantages:
Economy of energy
The film considerably cuts expenses on conditioners as detains about 75 % of solar heat in glass. The label of film Sun Control will reduce penetration of solar heat in the car. That reduces level of heating and gives additional effect of a cool, reducing loading on the conditioner
